ML Accessories Limited
LU5 5TA
www.mlaccessories.co.uk
SBJUN18_V4
WARRANTY
This product has a warranty of 3 years from date of purchase. Failure to install this product in
accordance with the current edition of the IEE Wiring Regulations, improper use, or removal of
the batch codes will invalidate the warranty. If this product should fail within its warranty period it
should be returned to the place of purchase for a free of charge replacement. ML Accessories does
not accept responsibility for any installation costs associated with the replacement product. Your
statutory rights are not affected. ML Accessories reserve the right to alter product specification
without prior notice.
The LED lamps fitted in this product are non-replaceable. The product should be recycled in the
correct manner when it reaches the end of its life. Check local authorities for where facilities exist.
Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may
damage the product. A light film of acid-free oil is recommended after installation and maintained
periodically (2-3 times a year) to aid corrosion prevention.
This product must be disconnected from the circuit if it subjected to any high voltage or insulation
resistance testing. Irreparable damage will occur if this instruction is not followed.
This product is unsuitable for installation in or near coastal and marine environments.
Care should be taken when installing into high ‘clay’ content soils which naturally retain water and
have poor drainage. We recommend IP67 or IP68 products to be installed where these environmental
conditions occur as IP65 luminaires will likely be compromised.
When installing in the ground, ensure the soil/ground is firm enough and suitable to support the
fitting. Do not install in very wet areas that are liable to flooding
Do not use any source of high pressure washers to maintain or clean this product.
This product should be installed vertically with the light facing upwards.
Note: If this product is being used in conjunction with external PIR or sensors, please confirm with
the manufacturer of the sensors that they are compatible with LED products
GENERAL
WARNING
4
