KNIGHT SMART CART OPERATION MANUAL
SECTION 2
INSTALLATION
6
A. Introduction
Prior to installing and operating the Knight Smart Cart, all operators using this device should be familiar with
the main components of the lifting system. (Refer to Figure 2-1)
Smart Cart:
The Smart Cart assembly is a powered lifting device. The upper drive assembly contains the
servo motor with holding brake, gearbox and chain bucket. The lower controls box contains the 24 VDC
power supply and AC Plug and charger.
Control Handle:
The main interface between the operator and the lifting device.
Foot Brake:
Prevents the cart from moving unintentionally.
Figure 2-1
•
This ergonomic lift cart is designed to assist the operator when lifting heavy loads up to 400 lbs.
•
The lift assist system consists of a stabilizing cart and a fixture attached to a vertical mast.
•
The fixture travels along the rail on the cart’s load trolley, enabling the system to move vertically.
•
The optional custom fixture holds the part or tool while it is being manipulated.
•
Control handles are used to guide the load vertically and move the cart within your facility.
System functionality are activated through the control handles
.
Motor, Gear box
and Chain bucket
Vertical
Mast
Foot
Brake
Controls
Enclosure
Control
Handle
