Installation & Operation Manual
60
Access modes
User
The user can adjust space heating target temperature by using the
UP and DOWN buttons (FIG. 11-1) at any time during normal
operation. By entering the USER code (0704), the user can also
change temperature units, time and date, and night setback
settings. In User Mode, the following parameters can be viewed
but not changed:
• Boiler outlet water target temperature in DHW
Mode
• Boiler model number
• Software version
• Total operating hours
• Total cycles
Installer
Most parameters are available only to the installer, accessible only
by entering the installer access code, see the Knight Boiler Service
Manual.
Saving parameters
(reference the Parameter Table in the
Knight Boiler Service Manual)
To save parameters and exit programming:
Press the ENTER/RESET button.
To keep parameter settings only for a current operating cycle:
Press the MENU/EXIT button 3 times after making all desired
parameter changes.
To enter a parameter and continue programming:
Press the MENU/EXIT button 1 time to return to the parameter
listings; press again to return to the menu listings. Remember to
press the ENTER/RESET button when finished programming in
order to save the changes made.
See the Knight Boiler Service Manual for a detailed description of
parameters and access modes.
11
Operating information
