20
Sensors with Solid Electrolyte
SensoGate WA 132
NOTICE!
The cable loop must be long enough
so that the cable does not impede the stroke
movement of the fitting. When the cable is
installed for the first time, you must first pull off
the split red service cap
(L)
.
7) Attach the extension
(V)
and turn it clockwise
until it noticeably snaps in.
V
L
V
L
F
E
8) Put the split (red) service cap
(L)
on the cable as
shown. Then push it into the extension
(V)
until
it noticeably snaps in.
9) Hold the sensor cable in a loop and fix it
using clamp
(E)
.
10) Connect the equipotential bonding cable to
terminal
(F)
(if required).
Long Immersion Depth
Installing the Sensor (continued)
