background image

Description, Operating Conditions 

 

Swing Piston Pumps NPK 09 

2        

  

1.  Description, Operating Conditions 

KNF pumps in the NPK range transfer, evacuate and compress  
oil-free. In operation they are maintenance-free. The noise levels 
from the pumps are ca. 60 dB (A) (one head model, with hose        
connectors and inlet filter fitted). 

 

1.1. Electrical Equipment 

See the motor-plate for full electrical data. 

The protection class of standard version is IP00. 

The ac-motors used are fitted as standard with a thermal switch to 
protect against overloading. 

 

1.2. Operating Conditions 

Handling air at temperatures b 5 °C …+ 40 °C. 

KNF swing piston compressors and vacuum pumps must not be 
used for liquids. You will find suitable liquid pumps in our Product 
Program. 

For maximum permissible operating pressure, ultimate vacuum, 
and flow capacity see section 10. 

The KNF swing piston compressors and vacuum pumps must not 
be used in areas where there is a danger of explosion. 

 

If your potential application lies outside the above limits discuss it 
with our technical adviser (see last page for contact telephone 
number). 

 

1.3. Ambient Conditions 

When the pump is operating the following ambient conditions must 
be maintained:  

ƒ

 

Ambient temperature during operation: between 
+ 5 °C …+ 40 °C.  

ƒ

 

The pumps must be protected from the effects of dust and 
water. 

ƒ

 

During operation an adequate supply of air for cooling 
must be provided. 

ƒ

 

The pumps must not be used in areas where there is a 
danger of explosion. 

 

Summary of Contents for UNPK09

















Reviews: