Installation and connection
Swing Piston vacuum pump NPK012
12
Translation of original operating and installation instruction, Englisch, KNF 316780-316783 05/19
7 Installation and connection
The pumps are only to be installed in accordance with the operating pa-
rameters and conditions described in Chapter
.
à
Observe safety notices (see Chapter
7.1 Installing the pump
à
Before installing, store the pump at the installation location to allow it to
reach the ambient temperature.
Mounting dimensions
à
For mounting dimensions, see the following figures:
Fig. 3 Mounting dimensions pump series NPK012
*Maximum screw-in depth
Cooling air supply
WARNING
Danger of getting burned by hot surfaces
Hot surfaces could occur if the pump overheats.
à
When installing the pump, make sure that
sufficient cooling air infeed and discharge is
ensured.
Immediate environment of the
hot pump parts
à
During installation, make sure that no combustible or thermally de-
formable objects are positioned in the immediate environment of the
hot pump parts (head, motor).
Summary of Contents for NPK012 Series
Page 27: ......
Page 28: ...KNF worldwide Find your local KNF partner on www knf com...
