Installation and connection
Swing Piston Pumps NPK 25
8
Translation of original Operating and Installation Instructions, english, KNF 121581-121584 08/16
6. Installation and connection
Only install and operate the pump under the operating parameters
and conditions described in Chapter 4, Technical data.
Observe the safety precautions (see Chapter 3).
6.1. Installation
Before installation, store the pump at the installation location to
bring it up to room temperature.
For the mounting dimensions see fig. 3 (NPK 25 AC) or fig. 4
(NPK 25 DC)
Fig. 3: Mounting dimensions NPK 25 AC
(All dimensions tolerances conform to DIN ISO 2768-1,
Tolerance Class V)
Fig. 4:
Mounting dimensions NPK 25 DC
(All dimensions tolerances conform to DIN ISO 2768-1,
Tolerance Class V)
Mounting dimensions
