background image

Swing Piston Compressor NPK03   

About this document 

 

KNF Micro BA314221-314224 NPK03-EN-1217 

Translation of original Operating and Installation Instructions, English 

1.  About this document 

1.1.  Use of the Operating and Installation Instruc-

tions 

The Operating and Installation Instructions are part of the pump. 

  Forward the Operating and Installation Instructions to any sub-

sequent owners of the pump 

Customer-specific project pumps (pump models which begin with 
"PJM" or "PMM") may differ from the Operating and Installation In-
structions. 

  In the case of project pumps, take note of any additionally 

agreed specifications. 

1.2.  Symbols and markings 

Warning 

 

WARNING 

 

This symbol indicates a potential danger. 

It also indicates the possible consequences of fail-
ure to observe the warning. The signal word (e.g. 
"Warning") indicates the level of danger 

  Here you will see actions for avoiding the dan-

ger and potential consequences. 

Danger levels 

Signal word  Meaning 

Consequences if not observed 

DANGER 

warns of immedi-
ate danger 

Consequences are death or se-
rious injury and/or serious prop-
erty damage

WARNING 

warns of poten-
tial danger

 

Death or serious injury and/or 
serious damage to property are 
possible 

CAUTION 

warns of a poten-
tially dangerous 
situation 

Minor injury or damage to prop-
erty are possible. 

Tab. 1 

Other information and symbols 

  This indicates a required activity (step).  

1.   This indicates the first step of a required activity. Additional 

consecutively numbered steps follow 

 

This symbol indicates important information 

Project pumps 

Summary of Contents for NPK 03 KV DC-M


















Reviews: