Operation
Laboratory vacuum pumps N 8__.3 FT.40.18
20
Translation of original Operating Instructions, English, KNF 121350-121429 11/18
4. Set the desired values at switches S1, S2, and S3 (see fig. 5).
See Table 8 for an explanation of the switches and for the val-
ues which can be set.
5. Replace the cover on the control box. Take care to ensure that
the seal is properly in place. Tighten the four screws of the
cover to finger tightness. Then tighten the collar nut of the ca-
ble inlet.
Summary of Contents for N 820.3 FT.40.18
Page 2: ......
Page 34: ......
Page 35: ......
Page 36: ...KNF worldwide Please find our local KNF partners at www knf com...
