KNF N 813.3 AN.29DC-B, Translation Of Original Operating And Installation Instructions

Page: 5 / 40

Diaphragm Vacuum Pumps N 813 Safety
Translation of original Operating and Installation Instructions, english, KNF 121240-121506 09/19 5
chine in which the partly completed machinery is to be assembled
conforms to the provisions of the Machinery Directive 2006/42/EC.
The following essential requirements of Annex I of Directive
2006/42/EC (general principles) are applied and observed:
−
General Principles No. 1
−
No. 1.1.2. / 1.1.3. / 1.3.1. / 1.3.3. / 1.3.4. / 1.4.1. / 1.5.1.* /
1.5.2.* / 1.5.8. / 1.5.9. / 1.7.4. / 1.7.4.1. / 1.7.4.3.
(* only for pumps with AC motor)
As these partly completed machinery are OEM-models the power
supplies and the equipment for disconnecting and switching-off the
partly completed machinery respectively have to be considered
when mounting as well as over-current and overload protective
gear.
In addition a protection against mechanical parts in motion and hot
parts, if existing, has to be provided when mounting.
The pumps conform to the Directive 2011/65/EU.
The following harmonized standards are met:
N 813.3 ANE
N 813.4 ANE
N 813.5 ANE N 813 ANDC-B
N 813 AN.29DC-B
DIN EN 50581 DIN EN 50581
DIN EN 55014-1/2 DIN EN 61000-6-2/3
DIN EN 61000-3-2/3
DIN EN 60204-1
Tab. 2
All repairs to the pump(s) must be carried out by the relevant KNF
Customer Service team.
Housings with voltage-caring parts may be opened by technical
personnel only.
Use only genuine parts from KNF for servicing work.
Customer services and
repairs