Technical data
Diaphragm Vacuum Pumps N 813
12
Translation of original Operating and Installation Instructions, english, KNF 121240-121506 09/19
Pump materials
Pump head
Aluminium
Diaphragm
EPDM
Valve
EPDM
Tab. 7 (part 2)
The pump is protected against overheating by a temperature
sensor on the motor board and equipped with overcurrent
protection.
If one of these safety functions is triggered or if the maximum
blocking time of the rotor is exceeded due to a fault, the pump
will be shut down and must be manually reset, as follows:
➔
Separate pump from the mains.
➔
Remove the cause(s) of the fault before restarting.
Summary of Contents for N 813.3 AN.29DC-B
Page 39: ......
Page 40: ...KNF worldwide Find your local KNF partner on www knf com...
