KNF FL 10, Installation Instructions Manual

Page: 8 / 12

Installation Installation Instructions FL 10
KNF Flodos 173856_MA_FL10_EN_01.docx1
8
3.4 Electrical connection
For terminal assignment, output data, and control requirements,
please refer to the data sheet
Observe the regulatory requirements for electrical installations:
 Overload protection and separating protective devices
 Contact protection and additional insulation
 Ground connections

Protection against vibrations, tensile stress, and corrosion
3.4.1 DC coils
CAUTION
Danger from burns or fire, poisoning from flue gases
If the pump is connected incorrectly, it may overheat and catch
fire.
 Connect the pump to the correct voltage
 Operate the pump in accordance with the technical data
 Take suitable precautions to limit maximum power con-
sumption.
3.4.2 AC coils
DANGER
Danger from electric shock

Connect the pump to the correct voltage
 Wear personal protective equipment
 Operate the pump only when you are sure it has no tech-
nical malfunctions
 Operate the pump in accordance with the technical data
 Ensure that the fluid circulation system is grounded
 Check the pump for damage regularly
 Disconnect the pump from the power supply when carrying
out maintenance work
 In case of fixed installation, install a maintenance switch
 Installation only by trained, skilled personnel who have
knowledge of the applicable international regulations
 Ensure contact protection for live parts (persons, cable, and
device protection)