KNEGT UTVolt, Operator'S Manual

Page: 44 / 49

WARNING
CAUTION: Avoid injury! Do not mix battery types, sizes or manufacturer. Failure to use
the correct battery could cause batteries to short circuit and/or spark(s) that could cause
electrical component failure or an explosion.
Battery
Tianneng Lead-Acid Deep Cycle Flooded Battery
Keep the battery and connecting wires dry and clean to avoid leakage. Regularly clean the
battery surface and connecting wires with a dry cloth. Do not use organic solvents to wipe.
If the appearance of the battery is adversely affected, it should be replaced in time.
Check the terminals regularly and there should be no looseness. Remove oxides from the
terminals and wire joints, and strictly prohibit metal debris and other debris from entering
the battery.
Try to avoid deep discharge and over-discharge, the charge is best when the discharge
depth is about 70% (that is, when the remaining power is about 30%).
The battery should use the original charger and the charger matched by the regular
manufacturer. After the battery is fully charged, it should not be charged for a long time to
avoid overcharging and losing water. The charging process should avoid outdoor cold
weather in winter and exposure to hot sun or other high temperature scenes in summer.
When the battery is in storage, the battery should be fully charged and stored, and
periodically recharged every other month to avoid sulphation and capacity loss of the
battery plate.