KNEGT 504G3 Series, Operation Manual

Page: 88 / 111

504G3
SERIES TRACTOR OPERATION MANUAL
86
(2) The PTO has no power
①
The driven plate lining in the hydraulic
cluch abraded heavily or the abrasion lean
to one side
②
The valve is broken
③ The hydraulic cluch leaks heavily
①
Replace
②
Replace
③ Replace
(3) The PTO can’t be separated completely
①
The button is broken
② The driven plate lining in the hydraulic
cluch has been locked up
③ Return spring of the hydraulic clutch is
broken
①
Check the button
② Check and repair
③ Replace
7.9 Hydraulic Hitch System
Troubles & possible causes Fixing methods
(1) Cannot lift whenever light load or heavy
load
① Oil returning valve block at open position
②
Gear pump does not work
a) Oil level in the lifter is too low
b) Filter net blocked seriously
① Check and clean valve
②
a) Replenish oil to specified
level
b) Clean or replace net
(2) Lift up if light load,unable lift or lift
slowly when with heavy load
①
Gear pump abraded seriously
② Any of the valves leaks
③
Seal rings of the oil intake pipe or the
pump is broken
①
Fix or replace the pump
② Check, clean and repair it
③
Replce
(3) Implement shivering during lifting, Static
sink goes fast
① Distributor single direction valve seal
poorly
②
Sink valve seal poorly
③ Oil cylinder safety valve leak
④
The hydraulic output has been jammed to
seal badly
⑤
Sink speed control valve is damaged to
leak
⑥ O ring of oil cylinder pistion damage to
leak
① Clean and repair if needed
②
As the same
③ As the same
④
As the same
⑤
Replace
⑥ Replace