73
Solenoid switch contacts
ablated
Battery insufficiently
charged
3.
Starter running continuously
after engine being started
Solenoid switch contacts
ablated
Incorrect adjustment of the
iron core travel of solenoid
switch
4.
Starter begins to run and hits
against the end face of ring
gear before meshing.
Repair solenoid switch contacts
Charge battery again
Repair solenoid switch contacts
Readjust the travel
Readjust the iron core travel of solenoid
switch
The information contained in this operation manual is of a general introduction only,
which is subject to change without notice at any time for technical or other reasons since
our product will be under uninterrupted improvements and modifications. Therefore,
we would request the users/dealers to give out the manufacturing date and serial No.
while they place order for spare parts and components.
Thanks.
