54
Capacities
Tractor Model
254G2 /304G2
404G2
Fuel tank
28 L (diesel)
28 L (diesel)
Cooling system
8L
10L
Engine sump
4L
5L
Gearbox and rear axle
20 L
25 L
Steering gear
2L
2L
Initial Hydraulic Oil and Filter Change
┈┈┈
50 hours
Hydraulic Oil and Filter Change, Thereafter ..........
┈┈
350 hours
Initial Engine Oil and Filter Change
┈┈┈┈┈
50 hours
Engine Oil and Filter Change, Thereafter
┈┈┈
100 hours
Note:
Change intervals stated above are for normal usage. Due to adverse operating
conditions that may be experienced (extremely dusty or muddy), change intervals may
need to be more frequent.
Safety Checks
A safety starter switch is installed on the tractor which prevents the engine from starting
unless the clutch pedal is fully depressed.
Check the safety starter switch daily.
Do not by-pass or carry out any maintenance on this switch, only authorised dealers are
recommended to carry out work on the safety starter switch. It is recommended that the
safety starter switch is replaced every 2000 hours or 4 years, whichever is sooner.
Cleaning the Machine
Clean the machine using water and/or steam. If steam is used, the machine must be
completely greased afterwards.
Check for Damage
1
．
Inspect steelwork for damage. Note any damage for future repair.
2
．
Inspect the tyres for damage and penetration by sharp objects.
3
．
Make sure all pivot pins are correctly in place and secured by their locking devices.
4
．
Ensure that the step and handrails are undamaged and secure.
5
．
Check all lamp lenses for damage.
6
．
Check that all safety decals are in place and undamaged. Fit new decals when
necessary.
