Step 3: Install Steering Column
The steering column will be in a folded position when unpacking. When
facing the front of the KneeRover
®
scooter, raise the steering column and
push the security pin in the clamp to the left (as shown in left photo) to
allow the column to lock into place. Raise the clamp lever upward and
tighten by turning it clockwise. Finally, push clamp lever down firmly to
secure the steering column (as shown in center photo). Reverse these
steps when needing to lower steering column for transport. Once knee
platform is installed, use the black knob (shown in right photo) to set the
handlebars at a comfortable height for operation.
Step 4: Install Knee Platform & Attach Basket
The knee platform is designed to be used with either the right or left leg.
Remove the knee platform from the bottom of the KneeRover
®
scooter by
removing the locking pin and loosening the clamp. Next insert the knee
platform post into the receptacle tube and set the knee platform at your
desired height for use by inserting the locking pin through the aligned
holes. Finally, tighten the clamp to secure the knee platform in place.
Removable basket attaches to the steering column.
Step 5: Brake Operation
To engage the brake, squeeze the brake lever on handle bar.
Your KneeRover
®
scooter comes equipped with a brake lock /
parking brake. Simply squeeze brake handle firmly and press the
button to engage the lock. To release the lock, squeeze the brake
handle again.
Ongoing Maintenance
With routine use, nuts and bolts on the steering column, tie rod
steering mechanism, and brake assembly can become loose. To
ensure safe continuous operation of this KneeRover
®
scooter, it is
important to periodically inspect the scooter for loose nuts and
bolts and re-tighten as appropriate.
Push Pin to Left
Clamp
Lever
Locking
Pin
Brake Lock
