Setup Continued & Maintenance:
Step 3: Brake Operation
To engage the hand brake, squeeze the brake lever on handle bar.
The KneeRover
TM
scooter comes equipped with a brake lock /
parking brake. Simply squeeze brake handle firmly and press the
button to engage the lock. To release the lock, squeeze the brake
handle again.
Ongoing Maintenance
With routine use, nuts and bolts on the steering column, tie rod
steering mechanism, and brake assembly can become loose. To
ensure safe operation of this KneeRover
TM
scooter it is important to
periodically inspect the knee walker for loose nuts and bolts and re-
tighten as appropriate.
Knee Scooter Set Up Instructions:
Please follow the step by step instructions on the following pages to
properly assemble your KneeRover
TM
scooter. The diagram below
identifies the key components of the scooter to aid with assembly.
Hand Brake Lever
8” Non Marking
Wheels
Basket
Adjustable Knee Platform
Handlebar Height
Adjustment Knob
Quick Release
Clamp
Seat Post
Clamp Lever
Steering Column
Brake Cable
Rear Brake
Mechanism
Weight Capacity = 300 pounds
Brake Lock