39
Fix the knife holder (7-6/1) by turning the quick
clamping lever (7-6/2) in counter-clockwise direc-
tion.
Place the knives (7-7/1) on the designated grind-
ing plates (7-7/2) (see grinding plate number).
The grinding plates have locating boreholes or
bolts. The knives must lie in the knife holder of the
grinding plates. Stack the grinding plates.
ATTENTION
Place the knives only in the designated
grinding plates. Check whether the labelling
is identical to the data in the program.
Use of a grinding plate that does not match
the knife can lead to damage to the knife and
machine.
A magazine trolley (7-8/2) is optionally available
for transporting the knife stack (7-8/1).
Push the knife stack (7-8/1) as far as it will go into
the machine via the guide rails (7-8/3) on the right
side.
Shut the doors of the machine.
2
1
7. Operation
Figure 7-6
Fixing the knife holder
1
2
Figure 7-7
Knives on grinding plates
2
3
1
Figure 7-8
Knife stack in machine
