Knauer BlueShadow Detector 10D, User Manual

Page: 13 / 44

14 Unpacking and Setup
KNAUER 10D User Manual V7670, Version 2.3
Unpacking and Setup
Contacting the Technical Support
You have various options to contact the Technical Support:
Phone +49 30 809727-111
Fax +49 30 8015010
E-mail support@knauer.net
You can make your requests in English and German.
Location Requirements
Power supply The device is only suitable for 24 V direct current.
Only the supplied power unit is to be used to connect the device
to the mains supply. Replace defective power unit only with
original accessories from KNAUER.
Only use power units with a permission for use from your coun-
try. In case of queries contact the Technical Support.
Power Plug
Note Make sure that the power plug on the rear of the device is
always accessible, so that the device can be disconnected from
the power supply.
Requirements The location for the device must meet the following require-
ments:
CAUTION!
Defect of the device due to overheating possible!
Protect the device against exposure to direct sun-
light.
Keep clear at least 15 cm at the rear and 5–10 cm
at each side for air circulation.

level surface for device or system

Protect from heavy ventilation

Weight 1.5 kg

Dimensions 121 x 129 x 187 mm
(width x height x depth)

Power Supply 24 V DC

Air humidity below 90 %, non condensing

Temperature
range 4 – 40 °C
39.2 – 104 °F