16
Installation
KNAUER
Degasser 20DG User Manual V7632A, Version 1.1
Connecting the Degasser with
a Pump
Each degassing chamber features an inlet and an outlet.
Connect the chambers vertically from top to bottom.
Remove the filler caps from the degassing chamber inlets and
outlets that are to be used, and keep the filler caps.
Use filler caps to close unused inlets and outlets.
The inlets of the degasser chambers are connected to the sol-
vent containers by means of Teflon tubes.
At the outlets of the degassing chambers, Teflon tubes are
also to be connected, using screw fittings and seal rings.
These tubes are then connected to the respective pump.
