27
Operation
AZURA® Valve Unifier VU 4.1 Instructions V6855
Output
In this submenu, the output control can be set to event or to trigger.
Setting to standby
Setting valve position to Home
In this menu point, the valve position can be set to Home.
Process
Figure
1. Change to Output display: Main Display > Drive
Setup > Out.Pin
2. Press selection button.
3. Change the setting (Event/Trigger) via the navigation
buttons.
4. Finish the process with pressing the confirmation but-
ton.
Process
Figure
1. Keep the selection button pressed for about
3 seconds.
2. Standby is shown on the display and the status LED
on the device lights blue.
3. To change to normal operation again, keep the selec-
tion button pressed for 3 seconds.
4. The main menu is shown on the display and the status
LED on the device lights green.
Process
Figure
1. Change to main menu point Rehome Drive.
2. Press confirmation button.
Out.Pin
Even
t
STANDBY
0
POS
1 / 4
W
REHO
DRIVE
ME
