20
Installation and initial startup
AZURA® Detector UVD 2.1S Instructions, V6820
Fig.
Reset device to default settings
4.9.4 Firmware Wizard: Setting a static IP address
Note:
More information about LAN settings can be found in the Mobile
Control Software Instructions in the chapter "Firmware Wizard” (docu-
ment no. V6851-1).
Legend
1
Text box for serial
number of the
device
2
Setting IP address
manually
3
Text box for IP
address
4
Text box for subnet
mask & gateway
5
Confirm changes
Fig.
Network settings in Firmware Wizard:
The device is switched on.
Firmware Wizard is installed and running.
The connection between Firmware Wizard and the device has been
established.
Process
1.
In Firmware Wizard, click <Reset LAN Settings...>.
2.
The window <Device connection settings> opens. Enter serial num-
ber of the device into the text field <Target device serial number>
1
.
3.
Select option <Use the following IP address>
2
.
1
2
3
4
5
Prerequisites
Procedure
