KMX Karts KOBRA, Assembly Instructions Manual

Page: 2 / 15

PAGE 2
1.0 Introduction
Thank you for choosing KMX !
When properly assembled and set up your KMX will provide many years of enjoyment.
KMX Karts Ltd does its utmost to design and produce safe and fun products and so the utmost care has been used to ensure that your KMX is strong,
safe and durable.
This manual gives you instructions for assembling and maintaining your KMX , as well as the guarantee conditions. Please take note of the directions
for use, to ensure many years of service from your KMX . Please keep this manual for future reference.
2.0 You Need to read this manual
Your KMX has a long life span. It should be assembled by an adult, who should be aware of the safety instructions and maintenance schedule.
This manual ensures the best results from your KMX . It is important for you to know the KMX , its characteristics and use.
The KMX is a fully functional Trike recumbent. This means your KMX is allowed on the public roads, and complies with the European General
Products Safety Regulations. It has also been tested to all relevant section of EN14764, the UK standard for bikes, and the CPSC for Bikes in the USA.
For safety we recommend that an Adult should supervise any child using a KMX .
Warning: Your KMX , like bicycles, Roller Blades, Roller Skates, Skateboards, Cars, Boats or any other moving vehicle, can cause injury. Exercise
caution when riding your KMX . Pay attention to street signs, be courteous to pedestrians and road users and at all times obey the law. Ensure that
both hands are on the handgrips and both feet are on the pedals at all times that the KMX is in motion.
KMX Karts Ltd also recommends that you wear proper prot
ection, such as a helmet and gloves while riding. Please bear in mind children’s natural urge
to play and that this could cause unexpected dangerous situations, for which the manufacturer and KMX Karts Ltd cannot be held responsible. Teach
your children how to use the KMX and point out possible dangers to them.
The KMX is designed for riders taller than 1.5m and weighing less than 95kg for off road riding and 130kg for on road riding. Should you have any
queries or problems, please contact your supplier or visit our Website:
www.kmxkarts.com .
KMX Karts Ltd cannot be held responsible for any omission in this users’ manual. Please always apply the highest safety precautions and follow these
guidelines when the user is using it.
3.0 Assembly Instructions
KMX KOLT AND KMX KOBRA MODELS
1. Carefully lift all the items from the box and remove the protective packaging.
2. Attach the right and left handlebar assemblies to the frame using the M8 bolts, nuts and washers. (See Drawing 1). Tighten the bolts securely
and insert the plastic end caps.
3. Attach the Steering Rod using the M8, bolts, nuts & washers. (See Drawing 1).
4. Attach the front wheels by positioning the brake disc between the brake calliper pads and inserting the axle. Attach the axle nut and tighten
the axle securely. (See Drawing 1).
5. Attach the rear derailleur hanger with the 3 countersunk screws provided. (See Photo 1).
6. Attach the rear derailleur (See Photo 1).
7. Attach the two Aluminium Seat Stay Adjusters to the rear part of the frame. Do not over tighten the bolts as the adjuster needs to move freely
(See Photo 2).
8. Kobra model only. Attach the rear brake calliper (See Photo 3).
9. Place the rear wheel into the frame. Insert the Quick Release and loosely attach the threaded end. Position the flag holder and tighten the
quick release (See Photo 4).
10. Insert the Boom fully into the frame (See Photo 5).
11. Attach the Chain Tubes and Pulley to the frame with the M8 Bolt, washers and nut provided. (See Drawings 2 and 3).
.
Note: If you have purchased the optional KMX Chain Tensioner then fit this now following the instructions provided with it .
Without the KMX Chain Tensioner the chain will be excessively loose and will need to be cut to length to suit the rider. (See Setting Up and Adjustment).
12. Feed one end of the chain through the short front chain tube, under the pulley, through the longer rear chain tube and around the rear
derailleur. Feed the other end of the chain through the front derailleur (Kobra model only), around the front chain ring and through the longer
chain tube. (See Drawing 3).
Attach the ends of the chain with the Quick Link Connector provided. (See Photo 6)
13. Kolt & Kobra Models - On the Right Side handlebar cut the untrimmed cable tie holding the rear gear cable and straighten the cable. Run
the cable along the frame inserting it into the cable clips as you go. (See Photos 7 and 8). Ensure the gear selector is in Number 8 and attach
the gear cable to the rear derailleur (See Photo 9). Attach the cable end.