www.kmwcomm.com
KMW Antenna Installation Guide
Mounting kits for ET-X-TU-42-15-37-18-iR-RA
Step 3
* Remove the second nut before tightening the first nut !!!
* Tighten the first nut to the recommend torque then insert
the second nut and tighten second nut to the recommended torque
Loosen 4 points bolts to extend adjustable clamp
Extend the adjustable clamp until the desired
angle is reached using an angle indicator.
Tighten all nuts with a torque of
304lbf.in[350kgf.cm], first the inner nut and
then the outer nut.
Recommended torque
for M8 NUT :
304lbf.in [350kgf
.cm]
There must be no open gap
between any parts of the
bracket that require
tightening.
Caution!
Never use torque wrench on the
second nut until the first nut is fully.
tightened to the recommended torque
specification!
KMW Communications Inc.
Base Station Antennas
For Mobile Communications
