KMS Easy Cool, Instruction Manual

Page: 14 / 28

Page: 13/ 28
Cleaning: before cleaning and maintenance, turn off the machine and unplug
the plug.
1. Clean the surface
Clean with surface of machine with a wet soft cloth. Do not use chemicals, such as
benzene, alcohol, gasoline, etc.; otherwise, the surface of the air conditioning will
be damaged or even the whole machine will be damaged.
2. Clean the filter screen
1
）
If the filter screen is clogged with dust, and the effectiveness of the air conditioning is
reduced, be sure to clean the filter screen once every two weeks.
2
）
Clean the upper filter screen frame
①
Clasp the wedging block of the filter screen frame with hands. Force down from the
outside to remove the filter screen frame. Unscrew four screws fixing the filter screen and
the rear housing to remove the EVA filter screen (as shown in the above figure).
②
Put the filter screen into warm water with neutral detergent (about 40
℃
/ 104
℉
) and
dry it in the shade after rinsing clean.
Postseason Storage:
1: Unscrew the rotary knob, unplug rubber stopper, and discharge the water in the water pan into
other water containers or directly tilt the body to discharge the water into other containers.
2: Turn on the machine, adjust it to low-wind ventilation mode, and maintain this state until the
drainage pipe becomes dry, to keep the inside of the body in a dry state and prevent it from
mildewing.
3: Turn off the machine, unplug the power plug, and wrap the power cord around the wrapping
post; install rubber stopper and the rotary knob.
4: Remove the exhaust pipe and keep it in a safe place for ease of locating.
5: Cover the air conditioning with a plastic bag. Put the air conditioning in a dry place, keep it
out of the reach of children, and take dust control measures.
6: Remove batteries of the remote control.
Note: Ensure that the unit is placed in a dry place and keep all machine components in a safe
place for ease of locating.
VI. Maintenance