EN - 7
Device-specific additional instructions for nailer
.3485
4
Filling the magazine
•
Ensure that nailer and fasteners are compatible (Chap. 1) with
each other.
•
Check fasteners for proper condition.
•
Put nailer carefully down in defined safe resting position (Chap. 3):
The driving nose must point away from any person. It must be
impossible to unintendly actuate trigger and/or release protection.
•
Press the latch button 1 and push the magazine cover 2 to the rear.
Insert the round head nails with the tips at the bottom into the
magazine 3. Then push the magazine cover 2 forward.
5
EU Declaration of conformity
The Joh. Friedrich Behrens AG, manufacturer or importer, address as on cover sheet, declares under sole responsibility this
product's conformity with all relevant provisions of the EU Machine Directive 2006/42/EG. The following standards are
applied: EN ISO 12100:2010 (Machine safety); ISO 11148-13:2017-11 (Hand-held non-el. machines - Fastener driving
tools); EN 12549:1999+A1:2008 (Noise measuring for driving tools); ISO 8662 (Vibrations at driving tools).
-------------------------------------------------
-----------------------------------------------------------
Tobias Fischer-Zernin, Management
Joachim Bauer, Documentation responsible
Summary of Contents for 12100581
Page 2: ...2 ...
