2.Switch on the Bluetooth audio device (e.g., smartphone) and start
the Bluetooth connection.
3.The Bluetooth device will now receive the device identification as
“KMOUK KM-HSB004”
.
4.When connected, the white LED light will keep on.
Second/ third times connection
1.Power on, the soundbar will connect back to the last paired device
automatically and restore the previous settings.
2.After the successful pairing, the
“
flashing.
If the device fails to connect
” will keep on instead of
•• If a previously connected Soundbar listing appears in the list, delete
it.
•• Then repeat steps 1 through 3.
NOTE
•• After you have connected the Soundbar to your device the first time,
it will connect back automatically when powered on.
Disconnecting the Soundbar from your device
Press and hold the
“ ”button on the remote control for more than 2
seconds to disconnect the device from the soundbar.
NOTES:
1.Disconnecting takes time because the device must receive a
response from the Soundbar. (The time required may differ, depend-
ing on the device.)
2.In Bluetooth connection mode, the Bluetooth connection will be lost
if the distance between the Soundbar and the Bluetooth device
exceeds 32.8 ft (10 meters).
•The Soundbar may not perform Bluetooth search or connection
correctly under the following circumstances:
• If there is a strong electrical field around the Soundbar.
•If two or more Bluetooth devices are simultaneously paired with the
Soundbar.
• If the Bluetooth device is turned off, not in place, or malfunctions.
