3
Installation
This section provides important instructions and guidelines for installing the
KMD-5831 Programmable Loop Controller PLC-28 Direct Digital Controller.
Carefully review this information prior to attempting installation.
Mounting
Use the four mounting holes to securely mount the controller using #6 hardware
inside a UL-approved Enclosed Energy Management Equipment Panel or other
suitable protective enclosure. Refer to Illustration 2.
Input Connections
Universal Inputs
Wiring connections are made depending on the intended application. Sixteen
Universal Inputs are provided on the controller. Observe the following guide-
lines. (Refer to Illustration 2.)
◆
Connect device inputs to the input terminal connections (+).
◆
Connect input grounds to the associated ground terminal (-).
Illustration 2. Connector Detail
O-R
STATUS
H O
A
O-R
STATUS
H O
A
O-R
STATUS
H O
A
O-R
STATUS
H O
A
1
2
3
4
O-R
STATUS
H O
A
O-R
STATUS
H O
A
O-R
STATUS
H O
A
O-R
STATUS
H O
A
5
6
7
8
6.00"
6.00"
