KMC Controls 56 Series, Owner'S Manual And Parts Book

Page: 26 / 46

21
MAINTENANCE PROCEDURES
Annually:
Use grease fitting on gauge wheel hubs to add grease.
Weekly:
Driveline crosses and rotor bearings need to be greased weekly.
Daily:
Driveline telescoping tube must be greased daily.
Periodically:
Gearbox oil should be checked periodically.
In extremely hard soils, it may be necessary to remove every other paddle to increase operating depth
and improve pullery.
Discs Continued:
BALANCING PROCEDURES
KMC balances all rotor assemblies to meet or exceed factory standards before installation. If your
KMC Stalk Shredder Puller begins to vibrate excessively, clean any dirt or debri off of the rotor
assembly and check to make sure all weights are still intact. If the vibration continues, please
contact your local balancing system specialists for re-balancing or replacement options for your
KMC Stalk Shredder Puller.
LUBRICATION