in chart #1.
chart #1
1A
1B
1B
chart #2
Step
NOTE:
1. DO NOT OVER-THIGHTEN THE NUTS AND BOLTS AT EVERY STEP.
2. DO NOT SNAP IN THE COVER OF PLASTIC CAP UNTIL YOU HAVE FINISHED THE ASSEMBLY
OF EACH STEP AND GO BACK TIGHTEN ALL OF THE NUTS AND BOLTS.
Step 2. Put all base frames on the clean, flat surface. Layout base frames 1A,
1B &
②
as shown in chart#2. Ensure the concave legs are facing inside.
