Care and Maintenance
Pre-Assembly
Read through all the instructions before beginning assembly. Unpack and identify all the parts.
Place them on a flat, non-abrasive surface. Assembly by two people is recommended.
PLANNING ASSEMBLY
HARDWARE INCLUDED
NOTED:
Hardware not shown
to actual size.
Fa (1 spare)
Bolt
Fc (1)
Allen Wrench
Fd (1)
Umbrella Insert Piece
Fb (4)
Screw
Fe(1 spare)
Glass Bumper
4
Wash frames with a mild solution of soap and water; rinse thoroughly. Do not use
bleach or solvents.
OBSERVE WEIGHT LIMITS
The recommended weight limits for the following products are listed below:
Table: 100 lbs
CAUTION:
If you overload your
furniture, injuries can occur.
Aluminum frames will never rust. In case of scratches to the powder-coated
paint finish, lightly sand the affected area and apply touch-up paint.
Always use an umbrella base to secure umbrella. Do not store anything on
glass tabletop. Ensure the “o” ring is in place in the umbrella hole in the
glass top before inserting umbrella. Make sure umbrella is in the closed
position when not in use and during high winds. Use furniture covers or store
indoors during cold or inclement weather.
