background image

1

When using electrical appliances, basic safety precautions 

should always be followed including the following, please 

read all instructions.

1. This product is for household use only. Do not use outdoors. 

2. Do not use pressure cooker for other than intended use.

3. Do not place the unit on or near a hot gas or electric burner,

    or in a heated oven

.

4. Do not use it in a place which is near splash water or fire.   

    Do not use it in a place exposed directly to sunshine or 

    oil splash. Put it in a place out of the reach of children.

5. 

 

    

 

6. Close supervision is necessary when the pressure cooker is 

    used by or near children. The adult should supervise the    

    children in order to make sure the children cannot play with 

    the appliance.

7.This appliance is not intended for use by persons (including 

   children) with reduced physical, sensory or mental   

   capabilities, or lack of experience and knowledge, unless   

   they are accompanied by a person responsible for their

   safety.

8. To protect against electrical shock, do not immerse cord, 

    plugs, or appliance in water or other liquid.

9. Be sure that handles are assembled and fastened properly 

     before each use. DO NOT use if the handle is damaged.

10. 

   

     

     

     

11. 

 

      

Caution

IMPORTANT SAFEGUARDS

Do not place the unit on an unstable location. DO NOT use it 

on a newspaper, foam or other object that may easily block 

the vent hole at the bottom.

Do not operate the appliance with a damaged cord or plug 

or after the appliance malfunctions or has been damaged in 

any manner. For electrical safety, any repairs to the product 

should be carried out by a qualified electrical person only or 

the product must be disposed.

Do not attempt to replace any parts inside the pressure 

cooker, as this may cause electric shock, fire or injury. 

Summary of Contents for anko MY-CS6002WP1






















Reviews: