AXLE NUT
ADJUSTING
BARREL
HIGH GEAR
ADJUSTING
SCREW
LOW GEAR
ADJUSTING
SCREW
12
3. Check for stack in Cable at point A and tightness
NOTE:
4. Loosen the nut on the cable anchor bolt.
5. Pull end of cable wire wi
6. While rotating wheel with p
he front, the derailleur moves to
sprocket high gear.
7. With the rear derailleur lever to rear in high gear, turn the “H” high gear adjusting screw
until the rear derailleur pulley guide is in line under the freewheel small gear.
NOTE:
When the “H” high gear adjusting screw is turned in a clockwise direction, the
pulley guide moves toward the larger sprocket lower gear position.
8. Set rear derailleur lever to largest sprocket low gear position.
9. Check that the chain does not slip off the large sprocket.
11. If the chain is unable to reach the largest sp
10. If so,turn the “L” low gear adjusting screw in a clockwise direction until the chain does
not slip off the larger sprocket when shifted.
rocket low gear. Or movement is difficult,
then turn the “L” low gear adjusting screw in a counter-clockwise direction.
THUMB SHIFTERS
THE RIGHT SHIFTER
Operates the REAR derailleur and
LOWER gears
H
L
