Page of 5
3
ILLUMINATION TOOL
USE AND CARE
Do not modify the illumination tool
in any way.
Unauthorized modification may impair the
function and/or safety and could affect the life of the equipment. There are specific
applications for which the
illumination tool
was designed.
Always check of damaged or worn out parts before using the illumination tool.
Broken
parts will affect the
illumination tool
operation. Replace or repair damaged or worn parts
immediately.
Store idle illumination tool.
When
illumination tool
is not in use, store it in a secure place
out of the reach of children. Inspect it for good working condition prior to storage and before
re-use.
Frequently clean
the conduction contact surface of the illumination tool to ensure best
performance.
When the illumination tool is not to be used for a long period of time.
Take out the
battery.
After long period of use.
Inspect the O-rings in the flashlight for damage. If damage
replace the O-rings to ensure to maintain the water-proof performance of the illumination
tool.
BATTERY REPLACEMENT
FLEX-POWER Operation — the Avenger W500 includes Flex-Power technology. This technology
allows you to power the illumination tool two ways, first with the included rechargeable battery
(included), second with 2 CR123 Batteries.
1. Unscrew tail cap counterclockwise and remove.
2. If replacing a battery. Remove old battery and dispose properly
3. Insert battery of choice. Either the rechargeable included or two CR123 bateries.
4. Replace tail cap by screwing on clockwise. Press tail cap button to test.
