Klutch 20067 Owner'S Manual Download Page 4

 

4 OF 7                                                                                       

 

 

 

Disconnect air supply

 from tool and place the switch in the locked or off position before making 

any adjustments, changing accessories, or storing power tools.

 

Such preventive safety measures 

reduce the risk of starting the power tool accidentally.

 

 

Secure work 

with clamps or a vise instead of your hand to hold work when practical. This safety 

precaution allows for proper tool operation using both hands.

 

 

Store idle tools. 

When tools are not is use, store them in a dry, secure place out of the reach of 

children. Inspect tools for good working condition prior to storage and before re-use. 

 

Use only accessories that are recommended 

by the manufacturer for your model.

 

Accessories 

that may be suitable for one tool may create a risk of injury when used on another tool. 

 

Keep guards in place 

and in working order. 

 

Never leave tool 

running unattended. 

 

USE COMPRESSED AIR ONLY. 

Use clean, dry and regulated compressed air to power this tool. 

Never use oxygen, carbon dioxide or any other bottled gas as a power source for this tool. 

 

TOOL SET UP 

 

 

Fig. 1 (Above) shows an optimal set-up that includes an inline filter, regulator and oiler. All of these 
components are sold separately. 
 

NOTE: 

If  you  are  not  using  an  automatic  oiler  system,  before  operation,  add  a  few  drops  of 

Pneumatic Tool Oil to the airline connection. Add a few drops more after an hour of continual use.

 

 

1.  Prepare the 1/4in. air nipple to connect to the air inlet on the 

Angle Grinder

. First, wrap the 

1/4in. air nipple with pipe thread seal tape (not included) before threading it into the inlet. 
Connect the 3/8in. I.D. air hose (not included) to a quick-disconnect coupler (not included) 
and then to the air nipple. 

2.  Turn on the air pressure on your compressor to 90 PSI. Do not exceed the recommended 

air pressure of 90 PSI. 

3.  Check the air connection for leaks. 

 

AIR SUPPLY 

WARNING:

 Ensure the air supply is clean and does not exceed 90 PSI while operating the tool. Too 

much air pressure and unclean air will shorten the product life due to excessive wear, and may cause 
damage and/or personal injury. 

Summary of Contents for 20067








Reviews: