6
MOD-TEK-100 - mounting instructions
c) Final mounting
www.KlusDesign.com
Ic
IIc
IIIc
10.
10.
10.
10.
10.
1.2
1.2
1.2
2.1
1.2
10.
1.1
To facilitate further work, mark
the location of the items
(1.2)
in
the RAM-TEK-100 profile, e.g. with
colored adhesive tape.
Prepare as many wedges
(10)
as there are items
(1.2)
. They will
prevent the OMODO-100
profile from falling out in the
initial phase of the mounting
procedure.
To prevent the OMODO-100
profile from falling out, insert
wedges temporarily
(10)
. They
should be inserted into the
marked spots in the gap between
item
(1.1)
and item
(2.1)
. There
should be one wedge for each
marked element
(1.2)
and they
should be placed from the side of
the profiled orientation line.
Insert the OMODO-100 profile
into the prepared mounting track.
To do so, press the profile to the
wall of the RAM-TEK-100 from the
side of the profiled orientation
line. After that, press it to the item
(1.2)
and move it towards the axis
of the RAM-TEK-100. This will
make the hooks of the
OMODO-100 profile interlock with
the hooks of the items
(1.2)
.
