DEVICE INSTALLATION
Installation must be carried out by an authorized technician according to the guidelines. Our company
cannot be held responsible for the damages to people, animals or properties due to improper
installation.
INSTALLATION WARNINGS
Dimensions and materials of the cabin or cupboard in which the built-in oven will be installed in have to be correct and it has to
be resistant to temperature increases. Please install as shown in Figure.
*The furniture walls in which the oven is installed in must be heat resistant. Wall panels must be resistant to 100 C especially if
the side walls are made of wallboard. Plastic or adhesive panels that are not resistant to this heat may deform and sustain
damage.
*For safety reasons, direct contact with electrical parts of the oven must be avoided.
*Isolation and protective parts must be installed in a way to prevent them from being removable by any tool.
*Oven must be installed as in Figure in order to provide a more effective air flow.
*It is advised to
leave a space of at least 40 mm on the back
for the kitchen unit in which the oven is installed.
*A support must be placed under the oven which can carry the weight when placing the oven.
*The back section of the cabin in the kitchen unit must be removed in order to provide better air flow.
*First complete the place in which oven will be installed and the electrical installation in order to ready the oven. Afterwards, call
the closest
VİNOLA Authorized Service.
*It is not advised to install the device near refrigerators or freezers, otherwise performance of said devices would be affected
from the heat radiated.
3
Figure 1
