KLS Martin independant Care Vertical ES, Instructions For Use Manual

Page: 16 / 20

independant Care Vertical
Instructions for Use
16
Revision 01
9 Carriage, Storage and Disposal
In the following environmental conditions, carriage and storage conformity is needed
• Temperature: -10 °C to +40 °C (+14 °F to +104 °F)
• Humidity: 30 - 75%
• Atmospheric pressure: 700 - 1,060 hPa
Do not overlap more than 5 devices and do not place them vertically. In case of irreparable damages or
end-of-life equipment, the device must be disposed following the existing rules. If the user does not follow
the rules above, he assumes full responsibility for creating potential effects to the environment and to
human health.
Below are shown the environment conditions’ use
• Temperature: -5 °C to +35 °C (+23 °F to +95 °F)
• Humidity: 30 - 75 %
• Atmospheric pressure: 700 - 1,060 hPa
10 FAQ & Troubleshooting
10.1 FAQ
Question Answer
Which are the materials independant Care is
made of?
Fixing structure (where provided) and screws – galvanized steel
Frame, arms, pendant – epoxy painted aluminum
Accessories – refer to the drawings (ABS, AVONITE, STEEL, STAINLESS
STEEL, CDF, etc.)
Is independant Care easy to install?
The installation of independant Care is not particularly difficult if done
following the instruction manual by a qualified staff
Does independant Care ship to destination as
separated elements?
independant Care is shipped as a ready to install single component packed
in cardboard box. Accessories are packed in cardboard box separately.
Is independant Care easy to clean? Yes, independant Care is easy to clean due to smooth surfaces
Is independant Care easy to maintain?
No maintenance is needed except for gas implants (please refer to this
manual)
What does “declared carrying capacity” mean?
The declared carrying capacity is to be intended as maximum payload as
shown in drawings in section 6 “Functioning”, page 10
Does independant Care have gas outlet prepiping
included?
It depends on request (please refer to QUOTATION and drawings)
10.2 Troubleshooting
Issue Cause Solution
Electrical outlet power failure No power supply Check if power supply has been plugged correctly