16
Find all of the parameters in detail below:
UT01
The parameter allows to set the current day of the week, select functioning day by day (weekly mode) or disconnect programming.
Upper display
Meaning
Lun
Monday
Mar
Tuesday
Mer
Wednesday
Gio
Thursday
Ven
Friday
Sab
Saturday
Dom
Sunday
OFF
Chrono-thermostat off
It is possible to set 4 time intervals when to switch the thermo stove on during the day. If the UT01 parameter is set with the current day (for example
Tuesday/Tue) it is possible to associate the ignition of PROGRAM 1, 2, 3 and 4. By pressing buttons 1 and 2 the desired value can be selected. This can be
carried out for every day of the week, as there is the possibility to select on which days to ignite the thermo stove and on which days to leave it off.
UT02
The parameter allows to set the current time. The time is shown in the lower display.
UT03
Used to set the minutes.
UT04
Reserved technical parameter.
Only for After-sales centres.
UT05-UT06
Parameters to respectively set the switch-on and switch-off time of PROGRAM 1. Their setting is active whenever the UT01 parameter is set in weekly
mode.
UT07
This parameter is active and assumes meaning when the UT01 parameter is set in weekly mode. When PROGRAM 1 programming is active, use button 1 to
select the day of the week and use button 2 to activate/deactivate ignition of the thermo stove. The example that follows shows ignition of the thermo stove
takes place only on Saturday and Sunday.
Lun
Monday
Mer
Tuesday
Mer
Wednesday
Gio
Thursday
Ven
Friday
Sab
Saturday
Dom
Sunday
Lun/off
Mar/off
Mer/off
Gio/off
Ven/off
Sab/on
Dom/on
UT08-UT09
Parameters to respectively set the switch-on and switch-off time of PROGRAM 2. Their setting is active whenever the UT01 parameter is set in weekly
mode.
UT10
This parameter is active and assumes meaning when the UT01 parameter is set in weekly mode. When PROGRAM 2 programming is active, use button 1 to
select the day of the week and use button 2 to activate/deactivate ignition of the thermo stove. The example that follows shows ignition of the thermo stove
takes place only on weekdays.
Lun
Monday
Mer
Tuesday
Mer
Wednesday
Gio
Thursday
Ven
Friday
Sab
Saturday
Dom
Sunday
Lun/off
Mar/off
Mer/off
Gio/off
Ven/off
Sab/on
Dom/on
UT11-UT12
Parameters to respectively set the switch-on and switch-off time of PROGRAM 3. Their setting is active whenever the UT01 parameter is set in weekly
mode.
UT13
This parameter is active and assumes meaning when the UT01 parameter is set in weekly mode. When PROGRAM 3 programming is active, use button 1 to
select the day of the week and use button 2 to activate/deactivate ignition of the thermo stove. The example that follows shows ignition of the thermo stove
takes place only on Saturday and Sunday.
Lun
Monday
Mer
Tuesday
Mer
Wednesday
Gio
Thursday
Ven
Friday
Sab
Saturday
Dom
Sunday
Lun/off
Mar/off
Mer/off
Gio/off
Ven/off
Sab/on
Dom/on
UT14-UT15
Parameters to respectively set the switch-on and switch-off time of PROGRAM 4. Their setting is active whenever the UT01 parameter is set in weekly
mode.
UT16
This parameter is active and assumes meaning when the UT01 parameter is set in weekly mode. When PROGRAM 4 programming is active, use button 1 to
select the day of the week and use button 2 to activate/deactivate ignition of the thermo stove. The example that follows shows ignition of the thermo stove
takes place only on Saturday and Sunday.
Lun
Monday
Mer
Tuesday
Mer
Wednesday
Gio
Thursday
Ven
Friday
Sab
Saturday
Dom
Sunday
Lun/off
Mar/off
Mer/off
Gio/off
Ven/off
Sab/on
Dom/on
