background image

User manual

klokers.com

1

6

2

remove

3

clip

4

5

CLIP/REMOVE THE WATCH HEAD FROM THE BRACELET

REMOVE THE CASE FROM THE BRACELET

1.

2. Push the button at 8 o’clock to position (4) to unlock the mecanism

3. 

 

Holding the button, slide the watch head up to unlock 

it from the bracelet (or any other accessory)

CLIP THE CASE TO THE BRACELET

4.

5. 

 

Slide the watch head from top to bottom on the Key of 

the bracelet (or any other klokers accessory)

6. 

 

Push the watch-head until a click is felt. Only this click will 

guarantee that the watch-head is correctly clipped on the bracelet.

ALL THE KLOKERS’ PRODUCTS ARE INTERCHANGEABLE WITH EACH OTHER!

unlocking it from its support to not drop it. klokers is not responsible in 

case of a fall during this manipulation.

Summary of Contents for KLOK-08

Page 1: ...etting KLOK 08 BASIC FUNCTIONING Three concentric discs turn counterclockwise A colored vertical axis on the top of dial patent pending indicates the time MODE DISPLAY BASIC FUNCTIONING Two concentric discs one for hours and minutes one for seconds turn counterclockwise A colored vertical axis on the top of the dial Mode Display TIME SETTING 1 Pull the crown out movement is stopped 2 Set the time ...

Page 2: ...celet or any other accessory CLIP THE CASE TO THE BRACELET 4 5 Slide the watch head from top to bottom on the Key of the bracelet or any other klokers accessory 6 Push the watch head until a click is felt Only this click will guarantee that the watch head is correctly clipped on the bracelet ALL THE KLOKERS PRODUCTS ARE INTERCHANGEABLE WITH EACH OTHER unlocking it from its support to not drop it k...

Page 3: ...tandard 364 DISPLAY Alignment tolerance of discs H and M 2 minutes AUTONOMY About 16 months GUARANTEE Two year warranty against all production defects See the guarantee given at time of purchase USAGE PRECAUTION Your watch comes with its blue static protections Remove them before considering any use of the watch glass watch case back the klokers key etc otherwise the closing system watch case and ...

Page 4: ...atch head is wet the water could penetrate the watch If the inner surface of the glass is fogged or if water drops appear inside the watch this means waterproofness has been diminished Immediately contact the retailer where you have purchased the watch Keep in mind waterproofness of a watch can be diminished by the deterioration of the adhesive of the glass or the seal or by rust formation on stai...

Reviews: