KlipXtreme KSB-210, Manual

Page: 5 / 17

IV. Preliminary steps
736.6mm
1. The soundbar can be placed on a desktop or hang on the wall.
2. If you decide to mount the soundbar on the wall, determine the location and
mark the holes on the surface. Drill holes must be placed 29 inches apart from
each other.
5. Drive the supplied screws into the holes with a screwdriver, leaving some
space between the head and the wall surface.
6. Make all the necessary cable connections before mounting the soundbar on
the screws (Aux, Optical or HDMI cables).
7. Once all connections have been completed, carefully slide the soundbar over
the screws you have just installed.
8. Now you can plug the AC cord of the soundbar into a wall outlet and the
soundbar is ready to use.
3. For gypsum or wooden walls, locate studs in the wall. You may use a stud
finder to determine the center of each stud.
4. Drill pilot holes and insert the supplied anchors if installing the unit on a
concrete or brick wall.