KlipXtreme KSB-210, Manual

Page: 4 / 17

Remote control
Buttons Description
1. Power button
2. Input button
3.
Vol. +/ Vol -
button
4. button
Press this button briefly to turn the soundbar
ON/OFF-Standby.
Press this button briefly to toggle among the available
input modes on the soundbar: BT, AUX, OP, HD.
As soon as a USB device is connected to the soundbar,
the track number will be displayed on the LED screen
and the indication US will appear inmediately afterwards.
In USB or BT mode, press any of these buttons
to select the previous or next track on your play list.
5.
Play/Pause
and Reset button
6.
Bass-/Bass+
button
7.
EQ PAIR
button
8. TRE +/- button
9.
Mute
button
Press this button to play or pause the audio coming
from the soundbar. This feature is available in the BT
and USB modes.
Press the reset button to set the volume back to 10dB,
and the bass and treble frequencies to 0dB.
Press these buttons to increase or decrease the
bass (low) frequencies of the soundbar.
Press this button to switch among the four EQ effects
on the soundbar.
Press and hold this button in BT mode to go back
into the pairing mode.
Pres these buttons to increase or decrease the treble
(high) frequencies of the soundbar.
Mutes the audio coming from the soundbar.
Press it again to unmute the soundbar.
Press the Vol + button briefly to increase the volume
coming from the soundbar.
Press the
Vol -
button briefly to lower the volume
coming from the soundbar.
In addition to the right panel buttons, an infrared remote control is included
which provides additional functions to allow greater control over the soundbar.
1. Install the supplied batteries in the remote control following the correct
polarity as indicated inside the compartment.
2. In order for the remote to operate properly, ensure that it is pointed toward
the front of the soundbar.
1 2
4
7
6
8
9
5
3
6