KlipXtreme KHS-628, Quick Installation Manual

Page: 3 / 15

Plug the supplied USB cable into the USB port of your computer or to a 5V
USB adapter to charge the battery.
Make sure that the headset is fully charged before using it for the first time.
The headset battery has to be initially charged for at least 2 hours. Thereafter,
the battery will take from 1.5 to 2 hours to recharge.
While the headset is being charged, the LED glows red.
When the battery has reached full capacity, the red LED turns off.
Note:
Before installing this product, please make sure your computer or laptop has
the built-in
Bluetooth ®
feature available.
III. Basic operation
IV. Advanced operation
:
press and hold to select the next track. Briefly press this button to increase
the volume level of the unit (the headset will warn you with a short beep when
the maximum level is reached)
Built-in microphone:
for hands-free calling and conferencing
Mode switch:
press this to reset
Bluetooth
®
. A second press will disconnect
Bluetooth ®
from a memorized device. The device will automatically switch to
auxiliary mode as soon as the stereo cable is inserted into the line-in jack
Status indicator light:
6.
7.
8.
9.
10.
Pairing the headset with your mobile device
Charge your headset
Alternating green and blue LED indicates that the headset has entered into
the pairing mode. The LED changes to solid blue when the wireless
connection has been established
The blue LED blinks slowly during a call or when listening to music. It will
turn solid blue when the headset is connected through
Bluetooth
®
, but no
signal is being received from your wireless device
In auxiliary mode, media playback will start automatically and the LED turns
off in order to enter into the power saving mode. You must power on the
headset again to use the other input modes
The LED glows solid red while charging
•
•
•
•
Auxiliary input:
for wired playback
•
•
•
•
•
Press the power button to power on the headset. An audible tone will be heard
as soon as the device turns on.
Next, set your
Bluetooth
®
mobile phone to “discover” the wireless headset.
Place both devices not more than one meter away from each other.
The LED blinks green and blue alternatively to indicate that the headset has
entered into the pairing mode and it is ready to be detectable for the first time.
On your mobile phone, tap the newly discovered audio device (KHS-628) being
displayed in the
Bluetooth
®
list.
When the phone asks if you want to pair with the headset, click
Yes
or
Ok
to accept.
1.
2.
3.
4.
5.
6.