Headphone
MPN
KWH-500
Technical specifications
Form factor
Driver unit
Maximum power output
Frequency
Impedance
Sensitivity
Charging input (DC)
Microphone
Form factor
Directivity
Frequency
Impedance
Sensitivity
Volume control
Connectivity
Connection type
Wireless RF frequency
Wireless range
Battery
Battery type
Battery charging time
Battery run time
Battery standby time
On ear
Ф40mm
20mW
2.402-2.480GHz
32Ω
(-40dB)±3dB
5V DC ≤500mA
Built-in
Omnidirectional
20HZ-16,000HZ
<2.2KΩ
(-40dB)±3dB
Yes
Bluetooth®
V. 5.0
2.402-2.480GHz
100ft or more (BT V. 5.0),
33ft (BT other versions)
400mAh/3.7V lithium ion-polymer battery
2 hours
21 hours at 50% volume capacity*
18 hours at 100% volume capacity*
About 200 hours
VII. Frequently asked questions
a. How to reconnect your phone with the device when connection has failed.
If the
BT
connection was not successful at the first time, disconnect your mobile
phone and try to connect again. The headphones will pair automatically as soon
as you turn them on.
b. How to mute the microphone.
During a call, press and hold the
and
Volume -
buttons for about 1
second at the same time to mute the microphone. Press and hold them again to
unmute.
c . What is the password for pairing?
Some devices require a password for pairing. You can try the following
sequences:
0000
(four zeros),
8888
(four eights),
1111
(four ones) or
1234
(one,
two, three, four), to see which one works.
d . Which devices can be used to charge your headphone?
Any car charger, power bank, PC, or any other device with a 5VDC
≤
500mA
charging current could be used to charge this item.
e. How to delete paired devices.
1. Turn on the headphones, and proceed to disconnect the
Bluetooth
®
mode from your
mobile device.
2. Press and hold the
Power/Multifunction
and
buttons at the same
time for about 5 seconds to delete previously paired devices; the blue and red LEDs
will blink fast indicating that the unit has entered into the pairing process.
3. To pair your headphones with the last mobile device previously disconnected click
OK on the “
Bluetooth
®
pairing request”
that will be displayed on the screen.
Summary of Contents for Keon KWH-500
Page 1: ...KWH 500 Keon ...
