Surround sound experience
Seating position
IV. Initial setup
1.
Then, install the two AAA supplied batteries inside the remote control.
2.
Next, connect the front, center and rear satellite speakers to the corresponding output jacks
on the back of the main unit.
3.
Connect the left (red) and right (white) RCA plugs into the matching input jacks on the back
of the main unit for wired playback from audio devices fitted with a RCA or 3.5mm stereo
connection. Proceed to connect an external audio device, such as a laptop, television set,
MP3/4 player, smartphone or tablet.
4.
In addition, the DVD inputs let users enjoy multichannel surround sound, through the use of
the subwoofer and the five satellites (two front and two rear speakers, plus one center
speaker). Audio RCA cables are required to do the connections, which are not supplied.
When connecting RCA cables, make sure to match the color coded pins to the appropriate
jacks on the component being used as a source.
5.
Once all the speakers and audio components have been properly connected, plug the AC
cord of the speaker system into a wall outlet.
6.
Turn on the speaker by switching the main power on. After that, the user can also press the
red standby button on the remote control to toggle between active and standby modes.
7.
Select the input mode by pressing the source selector button located on the front of the
main unit or by using the corresponding input buttons on the remote control. The available
modes are:
USB:
enables audio playback from compatible files stored in a USB memory stick
SD:
enables audio playback from compatible files stored in a SD memory card.
Bluetooth:
enables the streaming of audio wirelessly from compatible
Bluetooth
devices.
Aux:
enables audio playback from devices fitted with an auxiliary 3.5mm jack.
DVD:
additional input enables the connection of audio components with full 5.1 channel
capability.
Op
: provides the connection of sources with digital audio ports.
Note:
please remember that some commands will not be active or behave differently in
both line in modes (refer to the product diagram for details).
8.
Using the controls on the front of the main unit or the remote, you can manage and select
your tracks, mute the speaker audio, in addition to adjusting the output levels of each
channel individually.
9.
If you do not intend to use the speakers for a long time, set the power switch to its
OFF
position.
V. Advanced operation
Note:
Before installing this product, please make sure your device has the built-in
Bluetooth
®
feature
available.
Pairing the speaker with your
Bluetooth
®
device
1.
Place both devices not more than one meter away from each other.
2.
Enable the
Bluetooth
®
function on your device and set it to discover the
KWS-760
wireless
speaker.
3.
On the speaker, press the
Source
button to select the
Bluetooth
®
mode as soon as it
appears on the screen. Alternatively you may use the remote to enable the
Bluetooth
®
feature.
4.
At this point, two short beeps will be generated, making the red dot on the display to start
blinking. This indicates that the system has entered into the pairing mode.
5.
Once the speaker is listed under the newly found
Bluetooth
®
devices, accept by pressing
Yes
or
OK
. If you have a lower
Bluetooth
®
version, you may be prompted to enter the passkey
0000
(4 zeros).
6.
If pairing is successful, another short beep will be heard, making the dot on the LED change
to steady red on the speaker screen. On your device, a message will be displayed confirming
that the connection has been established.
7.
If after 60 seconds the pairing process fails, please repeat steps 1 through 5 described above.
8.
From then on, your device will be automatically paired with the speaker.
VI. Multichannel surround setup
In order to get the best perfomance from your audio system, the optimum location for the
speakers needs to be determined.
Most DVDs and many streaming sources come with a 5.1 channel format, which is fully supported
by this system.
Note: PRO-LOGIC
must be
ON
to experience the full 5.1CH setup.
To check if PRO-LOGIC is enabled, press the button on the remote or subwoofer. The display will
show
PL.ON
when the function is activated.
5.1 channel system setup
Summary of Contents for Cinematik KWS-760
Page 1: ...KWS 760 Cinematik...
