KlipXtreme Athletik KHS-633, Manual

Page: 3 / 19

Note:
Before installing this product, please
make sure your device has the built-in
Bluetooth ® feature available. If your device is
not Bluetooth ® -enabled, you must purchase a
Bluetooth receiver.
Plug the supplied USB cable into the USB
port of your computer or to a 5V USB
adapter to charge the battery.
Connect the micro-USB end of the cable into
the charging port of the headset.
Make sure that your headset is fully charged
before using it for the first time.
The headset battery has to be initially charged
for at least for 3 hours. Thereafter, the battery
will take around 2 hours to recharge.
While the headset is being charged, the LED
glows red. The status light turns solid blue
once it has reached full capacity.
The red LED blinks slowly when the battery is
low and needs to be recharged. •
•
•
•
•
•
Press and hold the power button for 4
seconds to turn on the earphones on. The
blue LED indicator will glow twice and an
audible tone will be heard.
To power off the device, press and hold the
power button again for 4 seconds. The red
III- Basic operation
IV-Advanced operation
Charge your headset
Pairing the earphones with your
mobile device
Turning your headset on and off
1.
2.
Place both devices not more than one
meter away from each other.
Set your
Bluetooth ® phone to “discover” the
wireless headset.
Press and hold the power button for
several seconds to turn the headset on and
to put it into the pairing mode.
An audible tone will be heard, accompanied
by alternating blue and red LEDs, to indicate
that the headset has entered into the pairing
mode.
On your mobile phone, tap the newly
discovered audio device (
KHS-633 )
displayed in the Bluetooth ® list.
When the phone asks if you want to pair
1.
2.
3.
4.
5.
6.
LED indicator will glow twice and another
audible tone will be heard.