©Copywrite 2021 EAR Micro
Single-Touch
A Single Touch requests the battery level in the charger. The LEDs will sequence from the middle
outward to acknowledge the button press and cycle back off. The LEDs will then sequence from the
middle outward to indicate the battery level in the charger. Similar to the battery level in the buds, the
LEDs indicate 10% to 30%, 30% to 50%, 50% to 70%, 70% to 90%, and above 90%.
Double-Touch
A Double-
Touch will put both buds and the charger into a “Sleep” mode. This is a power saver and is
particularly useful to save battery life in both the buds and the charger.
1-Second Hold
A 1-
Second Hold will wake the buds from “Sleep”, allow them enter pairing mode, and attempt to pair
with a previously paired phone all before removing them from the charger.
10-Second Hold
Should the need arise to reset the buds, a 10-Second Hold of the charger button with the buds in the
charger and the doors closed will perform a quick reboot of the buds.
30-Second Hold
Should the need arise to reset the charger, a 30-Second Hold of the charger button will perform a quick
reboot of the buds.
Charging the Charger
Qi Charging
The T10 charger can be charged with the optional wireless mini puck that is supplied by EAR Micro or
most any Qi compatible wireless chargers. When the T10 Charger is properly placed on the wireless
charger, the wireless Charger should have an indicator that the T10 Charger is charging. The lights on
the T10 Charger will also cycle in a back-and-forth sequence to let you know the T10 Charger is charging
If using our mini puck, the light in the base of the puck will illuminate. The mini puck mates perfectly
with the T10 Charger because it is contoured to the exact shape of the T10 charger. Magnets hold the
mini puck and the T10 Charger in the proper alignment.
