Operating instruction Spring closing unit INTEC 40KS
Page
3
of
3
Valid from 04/2018
Reducing the spring-force:
After removing the closing plug, you will see the safety catch which is screwed into place. Do not
unscrew the safety catch under any circumstances. This safety catch has a drill hole in its centre
through which you can see the head of an allen screw, see also the following image. Turn the allen
screw counter-clockwise (
↶
) to decrease the spring closing force. Once the screw stops lightly on the
safety catch while you are unscrewing it, you have reached the minimum set spring force.
Warning, do not continue unscrewing the screw!
7 Marking
All spring closing units are labelled with KLINGER SCHÖNEBERG, Type INTEC 40KS, a size, and their
item and serial numbers.
In the interest of technical progress, designs and dimensions are subject to modification.
KLINGER SCHÖNEBERG GmbH | Heidelberger Straße 3 | DE-76676 Graben-Neudorf
Fon +49 7255 71170 | Fax +49 7255 7117 17 | www.klinger-schoeneberg.de | [email protected]
allen screw
safety lock
closing plug
