Page 24 of 30
Version 1.3
© KLING & FREITAG GMBH
User's Manual
K&F
VIDA M Accessories for Mobile Use
4. Seal the bushing hole using the
supplied grommet.
As you push the grommet into
the hole, compress it slightly.
Ensure proper seating.
5. Screw the green/yellow ground
wire to the connector panel us-
ing the Allen key (size 2.5).
Be sure to place the two supplied
serrated washers above and be-
low the ring connector, respec-
tively.
6. Insert the Phoenix power con-
nector into the appropriate port.
7. Ensure correct cable wiring as
shown on the circuit board!
8. Ensure proper seating.
